Wednesday, October 26, 2011

Anti-Wrench Collar For Commercial Front Door

No matter how you look at it, your aluminum and glass front door is a security liability; but it doesn't mean you should just sit down and accept it! In fact, there are a a number of things you can do to make this door a more secure, if not from a hardware angle, at least by appearance.
  1. First, you can install physical protection on the lock cylinder. You can use a CRL Cylinder Guard, which is inserted into the door and anchored with a retainer ring behind the aluminum stile. However, this device has been known to cause interference with the Adams-Rite lock mechanism. If you opt to have this installed, make sure your locks turn with ease and that there is no grinding as you turn the key. Another guard to consider is the Keedex guard shown above. This item costs the locksmith around $7.00 and will keep a burglar from using Vice grips on your lock. In Tennessee, you may pay a locksmith around $85 to show up and install this item.
  2. You can install a MAG strike protector for the narrow stile door. This device will make it harder for thieves to pry the bolt through the soft aluminum metal frame. If you have a hook bolt, a quick visual inspection will reveal this, then your door is especially vulnerable to crow bar attacks. Do know that any latch guard can be compromised with time. What you want to do, however, is make the burglar go to the next store.
  3. Get an alarm and display the warning stickers. Or, just go online and get the stickers! You can also buy a stand-alone alarm unit to put on this door, like the EAX-500 by Detex. Although this device will not be monitored by an agency, if the door is breached after hours, the burglar is likely to flee.
  4. Because there is no real fool-proof way to secure your aluminum glass storefront door, a good alarm must be considered, along with the lock hardware upgrades, and good lighting.

No comments:

Post a Comment