Masterkeying Problems - Your Incompetent Locksmith Has Filed Down Your Cylinders

Chances are there are some locksmiths in your area that are highly incompetent. They drive the vehicle, wear the shirt, and have the advertisements; but they have no real clue about quality work. In Nashville, TN, even some of the oldest locksmiths are destroying customers locks so that they cannot be master-keyed securely. You would be surprised by who it is, because they are highly regarded in the community. When an incompetent locksmith re-keys your locks, he removes them, puts the wrong sized tumblers in the chambers, and grinds the lock cylinder down on a grinder or he hand files them. When he does this, he is removing from .020 to ,045 of an inch of valuable metal from your lock. He is ruining your lock!

Now, let us say that you call another locksmith in to master-key the locks. When a lock is master-keyed, a master key works the lock and an individual, different key works the lock as well. In fact, a master key system can have more levels than just two. But the problem comes when your incompetent locksmith files the cylinder plugs down to fit his wrong tumblers. Why? Because there are master pins that start at .024 of an inch. If he files the plug down to .045 of an inch, you can see that a .024 inch master pin will float in empty space and jam your lock.

There is a way around this problem, however. Today I did a small master key job where a locally famous, incompetent locksmith preceded me. The plugs were all filed down and some of the chambers were mauled. Because the master key system was small, I designed it to take larger master pins. Instead of making small two-step increments in the system, like a #2 cut in the master and a #4 cut in the change key, I went to a #5 in the change key. The difference between the #4 and #5 was sufficient enough to compensate for the filed cylinder plugs. So, the difference between a #2 master key cut and #5 change key cut is 3. A 3 master pin is thicker than a number 2 master pin.

I will tell you just how prevalent lock cylinder filing is. A number of years ago there was locksmith school here in the southern part of the country. The owner told me to insert the pins, grind the cylinder, and that would take care of the job; and this guy was grinding away a fourth of the cylinder. His excuse was that the lock was not pick-proof anyway. What he did was to make the lock no longer fit to be keyed. He also made the lock easier to pick and made the chances greater that a wrong key could "jiggle" the lock open.

So, if you want your locks master-keyed, you will need to know if your locksmith has filed the cylinders down. If he has, and he won't tell you they have been filed, he will have to sell you replacement cylinders. The cost of your job will be double.

If you suspect that your locksmith is filing your cylinders, have another locksmith install a new cylinder and call the suspect locksmith to key it. Have the first locksmith inspect the work. If the lock has been filed, fire the old locksmith.

A Murfreesboro Locksmith Does Shoddy Work and Lies to Customer

I received a call from a new client on St. Andrews Street in Murfreesboro, TN. The manager called me over to look at her Adams-Rite dead latch and exit paddle. There was no faceplate on the Adams-Rite lock mechanism. The manager asked the locksmith about the absence of the cover plate and he replied that the lock does not come with a cover plate. He could not fool the manager, however. I was called to tighten the lock, which was falling out of the door, and install a make-shift cover plate, which looked so good the manager decided to just keep the plate and not have me come by and install the "correct" plate. When it comes to glass door dead latches, the face plate plays a vital role in keeping the lock centered. Without it, the lock moves in the door and the activation plug of the paddle falls out, disabling egress.

Remember: if the completed lock service does not look right, then it isn't right. This is especially true when it comes to glass storefront doors. Demand that your job be done properly. If it isn't done properly, refuse to pay.

Managers Should Keep A locksmith Service File For Warranty Purposes

Whenever you call a locksmith, plumber, electrician, etc., be sure to ask about any warranties that might be available to you for the services performed and the goods purchased. Before you send the receipt in to corporate, be sure to make a copy of it and place it in a folder labeled, "locksmith" or "plumber". On that invoice copy, include what was done, where it was done, and what was purchased. Write down any warranty information that the technician provides you. If you have as service issue that arises, check the file to see if the service you now need was something that was recently done. I wish I could tell you how many times I have serviced locks for customers who had no idea when the locks were installed. Without paperwork, a technician can seldom give you warranty service.

Some locks, for example, have 1, 3, 5, and 15 year warranties. No paperwork? No replacement. Other things that have warranties are door closers, panic bars, Detex alarms, Alarm Lock Trilogy units, door levers, safes. Keep a file for every service that you contract. Make notes. In the end, it might just save your bonus.